Skip to content
Transfer Station

Killingworth Transfer Station

Killingworth, Lower Connecticut River Valley Planning Region, CT · All sites in Lower Connecticut River Valley Planning Region

Killingworth Transfer Station is a transfer station in Killingworth, Lower Connecticut River Valley Planning Region, Connecticut, operated by Town of Killingworth.

According to OpenStreetMap and the facility's website, it takes brush & limbs, cardboard, furniture, household trash, recycling and scrap metal. Published fee: $100 per ton (checked October 5, 2026). Use is limited to residents, so bring proof of residency. It does not accept commercial or contractor loads. It is one of 22 disposal sites we list in Lower Connecticut River Valley Planning Region.

Hours

MondayClosed
Tuesday2 PM – 7 PM
WednesdayClosed
Thursday2 PM – 7 PM
FridayClosed
Saturday8 AM – 2 PM
SundayClosed

Some sites stop taking loads before the posted closing time, and holidays or weather can close a site without notice; call (860) 391-5527 to confirm.

Fees

$100 per ton

ItemPriceUnit
textiles100/ton

Source: townofkillingworth.com · checked October 5, 2026. Rates change; confirm with the facility before you haul.

Estimate a load's weight with the dump fee calculator.

Before you go

Built from this listing's record. Anything it does not cover, ask when you call.

  • Check the hours above before you leave, and get there well before closing: some sites stop taking loads early.
  • Residents only (as published): bring proof of residency, and ask which documents they accept.
  • Contractor loads are not accepted here, as published.
  • Payment methods are not listed: ask which they take before you go.
  • Secure the load. Vehicles must be loaded so nothing drops, sifts or leaks in a way that is a hazard or nuisance, and every load and covering must be securely fastened. Each violation is an infraction. Source
  • Not accepted here: Asbestos (permitted loads).

What it takes

Accepted

  • Brush & limbs (accepted)
  • Cardboard (accepted)
  • Furniture (accepted)
  • Household trash (accepted)
  • Recycling (accepted)
  • Scrap metal (accepted)

Not accepted

  • Asbestos (permitted loads) (not accepted)

Materials as listed by OpenStreetMap and the facility's website. Anything not shown may still be accepted, or refused; ask the facility before loading.

Rules at the gate

  • To bring your trash to the Transfer Station, you must display a current town sticker on your vehicle’s windshield.
  • Each household is entitled to two stickers and each sticker is good for only one vehicle.
  • When you sell your vehicle, be sure to remove the town sticker.
  • Brush – up to 3″ in diameter and not longer than 8′ in length.
  • Scrap metal – items must be drained of any oil or gasoline
  • No wood larger than 3″ in diameter may be disposed of at the facility.

Location and nearby sites

123456782 miN

41.36722, -72.56396

Google Maps OpenStreetMap

  1. Transfer station

    Essex Transfer Station

    9.0 mi E · Essex, CT

    $200.00 sticker, $150.00 senior sticker, $30.00 punch card, $5.00 brush, $15.00/ · Takes C&D debris

More in Lower Connecticut River Valley Planning Region

Killingworth Transfer Station: questions

What are the hours at Killingworth Transfer Station?

Tuesday,Thursday 2 PM – 7 PM; Saturday 8 AM – 2 PM; Monday,Wednesday,Friday,Sunday closed. Hours change on holidays and in bad weather, so call ahead at (860) 391-5527 before hauling a load.

How much does it cost to dump at Killingworth Transfer Station?

textiles: 100 /ton. Rates were read from the facility's published fee schedule on October 5, 2026.

What does Killingworth Transfer Station accept?

Brush & limbs, cardboard, furniture, household trash, recycling and scrap metal, according to OpenStreetMap and the facility's website. Ask the facility about anything not on this list.

What can't you bring to Killingworth Transfer Station?

Not accepted here: asbestos (permitted loads), according to OpenStreetMap and the facility's website.

Is Killingworth Transfer Station only for residents?

Yes. It is limited to residents of its service area; expect to show an ID or proof of residency.

Can contractors use Killingworth Transfer Station?

No. Contractor and commercial loads are not accepted.

Before you haul

About this listing

Facts on this page come from:

Hours, fees or contact details last added October 5, 2026. Listed here since October 5, 2026. We are an independent directory, not the operator. How we source and check listings.

Something wrong or out of date? Report a correction.